Extremely narrow access, four viewing directions, no tools required for changing – the turboscope was developed to complete your inspection in a single pass. From Ø 1.9 mm, 306° shaft rotation, Made in Germany.
The Turboscope– industrial inspection redefined.
Faster – More versatile – More precise
1.9mm – 4.8mm diameter
All-rounder in industrial inspection – Faster – More versatile – More precise
1.9mm – 4.8mm diameter
In practice, the diameter determines whether an inspection is possible at all. The turboscope is available in diameters from 1.9 to 4.8 mm – with the right length and viewing direction for each application. Whether narrow bores, turbine blades or cavities that are difficult to access: there is always a turboscope variant that fits – without any loss of image quality.
Introduced. Inspected. Done. In just one pass.
The wrong endoscope doesn’t cost seconds – it costs hours. If the viewing angle, diameter or compatibility is not right, the system comes to a standstill. The Turboscope was developed for precisely these situations: four viewing directions can be changed modularly, diameter from 1.9 mm, 306° shaft rotation for full all-round visibility. Compatible with all common lighting systems and camera heads. No adapter. No conversion. No interruption.
Response within 24 hours
A fixed viewing angle means blind spots. Damage on the back of a component stays invisible — not because it isn't there, but because the device never looks. The 306° rotatable shaft changes that.
Access open, component exposed — and the viewing angle still isn't enough. Without switchable directions, the inspection ends right there. The Turboskop changes angle in seconds without removing the device.
Inspection channels under 3 mm — without the right device, you either skip the check or disassemble. With diameters from 1.9 mm and 160+ configurations, the Turboskop reaches where standard endoscopes fail.
The wrong endoscope doesn’t cost seconds – it costs hours. If the viewing angle, diameter or compatibility are not right, the system comes to a standstill. The Turboscope was developed for precisely these situations: No adapter. No conversion. No interruption. Four viewing directions modularly interchangeable, diameter from 1.9 mm, 306° shaft rotation.
Response within 24 hours – Made in Germany
Do you already use light sources, camera heads, or light cables from another manufacturer? HIPP adapters ensure that your existing equipment works directly with our rigid endoscopes—no need to buy new equipment.
We'll find the right adapter — so you can keep using your existing light sources, camera heads, and light cables.
We'll find the right adapter — so you can keep using your existing light sources, camera heads, and light cables.
Full compatibility with your existing system.
Do you already use light sources, camera heads, or light cables from another manufacturer? HIPP adapters ensure that your existing equipment works directly with our rigid endoscopes—no need to buy new equipment.
Configure your Turboskop in just a few steps to suit your specific application. Our product finder guides you through diameter, length, viewing direction, and probes — you can request your desired configuration right away.
Configure Turboskop now and submit your request.
Get a quote within 24 hours. Configure your Turboskop in just a few steps to suit your specific application. Our product finder guides you through diameter, length, viewing direction, and probes — you can request your desired configuration right away.
Easily determine the right size. Find the appropriate diameter and the optimal shaft length for your application.
Four properties that make the difference in depth inspection.
Technical details at a glance.
Shaft diameter, viewing angle, lengths, compatibility – the complete data sheet for the Turboscope is available to download as a PDF free of charge and without obligation.
Everything you need to know
Technical details at a glance.
Shaft diameter, viewing angle, lengths, compatibility – the complete data sheet for the Turboscope is available to download as a PDF free of charge and without obligation.
All information at a glance – Everything you need to know
The Turboskop is designed for seamless compatibility – from the camera to the light source. All accessories are matched to each other and can be integrated into your existing system without an adapter.
In use wherever precision counts.
Quick-locking system of the protective shaft with anti-twist protection
Rotatable endoscope shaft
Focusing unit for near and far range
DIN eyepiece connection high compatibility
High compatibility with all lighting systems
The Turboscope was developed for the most demanding inspection tasks in industry. From engine inspection in aviation to quality control in mechanical engineering – wherever narrow access, high requirements and no fault tolerance come together.
Quick-locking system of the protective shaft with anti-twist protection
Rotatable endoscope shaft
Focusing unit for near and far range
DIN eyepiece connection high compatibility
High compatibility with all lighting systems
In-house repair. No detour via the manufacturer.
Has your endoscope been damaged during heavy use? Hipp repairs directly on site in Freiburg – manufacturer-independent, transparent and fast. Damage analysis within 24 hours, no months of downtime.
In-house repair. No detour via the manufacturer.
Has your endoscope been damaged during heavy use? Hipp repairs directly on site in Freiburg – manufacturer-independent, transparent and fast. Damage analysis within 24 hours, no months of downtime.
Configure your Turboskop in just a few steps. Our product finder guides you to the right specification for your application. After submission, our team will get back to you within 24 hours.
The Turboscope combines a 306° rotatable shaft with four viewing angles (0°, 30°, 70°, 90°) – a rarity on the market. This gives you maximum flexibility for complex inspection tasks. Added to this is the quick-locking system, which enables the endoscopes to be changed in seconds – without tools and without wasting time.
The turboscope is ideal for visual inspections in industry, e.g. in aviation technology, mechanical engineering, the automotive industry, medical technology or for the maintenance of turbines and systems. Wherever precision, accessibility and time play a role. Implants for defects.
The turboscope is available in various diameters: from 1.9 mm for fine access channels up to 4.8 mm for larger visual inspections.
Unlike many rigid endoscopes with a fixed shaft, the Turboscope can be rotated almost completely around its axis – by 306°. This allows you to adopt several viewing directions with just one device and align the camera precisely to the test object – without conversion or readjustment.
The turboscope is compatible with all common industrial lighting systems – thanks to the standardized DIN eyepiece connection. It is suitable for cold light sources, LED systems or fiber optic light guides, for example – without any special adapters.
You can purchase the different viewing angles as separately available modules – these can be exchanged in next to no time thanks to the quick-locking system. This gives you maximum flexibility and saves you having to buy several complete endoscopes.
Request GT series video endoscope now
Product inquiry GM
Alexander Hipp
We will get back to you as soon as possible!
Request GT series video endoscope now
Product inquiry Turboscope
Alexander Hipp
We will get back to you as soon as possible!
Product inquiry HO/HB series
Alexander Hipp
We will get back to you as soon as possible!
Product inquiry FM series
Alexander Hipp
We will get back to you as soon as possible!
Alexander Hipp
We will get back to you as soon as possible!
Alexander Hipp
We will get back to you as soon as possible!
Alexander Hipp
We will get back to you as soon as possible!
